ASTM A234 WP11 Pipe Fittings are made according to the ASTM A234 standard for the butt weld pipe fittings. The standard is international and there are different grades of materials in this standard that are being used to produce the pipe fittings. The WP11 is one of these standards which includes seamless pipes for high pressure and temperature applications. Naveen Industries is a manufacturer and supplier of the A234 WP11 fittings in different sizes, types and grades. There are different manufacturing methods such as forging, hot rolling and cold drawing and heat treatments. The products also vary in type such as bends, elbows, reducers and connectors.
Our ASME SA234 WP11 fittings are suitable for elevated temperature services such as power plant applications, boiler accessories, heat exchanger parts and other fittings that need to operate under high temperature. The WP 11 alloy steel fittings are used with the similar graded piping to make sure the entire system is stable. These fittings can vary in type and functionality. The WP11 elbow is used to change the direction of pipe mostly in 90 degree angles. The grade WP11 reducer is used to reduce the volume of the flow and the WP tee is used to connect or branch three pipes. Please contact us for any kind of pipe fitting inquiries.
Table of Content
ThicknessSch 5s, Sch XXS, Sch 160s, Sch 10s, Sch 80s, Sch 40s
|Specifications||ASTM A234 / ASME SA234|
|Form||Tee, Cross, Reducer, Elbow, Bend, Cap, Nipples Stub end|
|Dimensions||ASME B16.28, ASME/ANSI B16.9, MSS-SP-43|
|Type||Welded / Seamless / Fabricated|
|Size||1/8” NB TO 48” NB.|
Available testing facilities of ASTM A234 WP11 Pipe Fittings are as follows PMI/IGC test, hardness test, pitting resistance test. The sum of Cr and Mo shall not exceed 0.32% in A234 WP11 Elbow
|Grade||Tensile Strength (Mpa)||Yield Strength (Mpa)||Elongation %|